Kuhn Axis models fertilizer spreaders with Electronic mass control (EMC)

The AXIS H-EMC W (Electonic Mass Control) fertilizer spreader is equipped, as standard, with application rate control on each spreading disc. The position of the metering outlet is corrected every second, according to the torque measured on each spreading disc, separately; left and right.

EMC technology provides many advantages:
– Application rate respected at each metering unit,
– No risk of clogging,
– Instantaneous detection and correction of flow rate variations,
– Empty hopper sensor,
– Flow fault sensor.

The AXIS H-EMC-W fertilizer spreader also has variable working width by GPS: Section Control with standard integration of: – OPTIPOINT: automatic calculation of outlet opening and closing points according to fertilizer type and spread area.
– VARISPREAD PRO: continuous section control at very high speed. 1 section per metre with new Speed Servo motors. Airtight, high-speed, precise.

The right dose at the right place while avoiding the « dose effect » thanks to the revolutionary distribution of the CDA System, common to all AXIS fertilizer spreaders. AXIS 40.2 H-EMC-W is compatible, as standard, with separate left/right application rate adjustment by GPS.

The machine is 100% ISOBUS compatible ready. Control spreading from your driving seat with your tractor’s CCI or ISOBUS terminal.

The weighing system with weighing cells indicates how much fertilizer remains in the hopper